NAUE m³ wall systems - Nail The NAUE NAIL system combines the strength and durability of Secugrid® geo-grids with soil nails to create a steep slope reinforcement system at slope incli-nations up to 60°. Secugrid®, with its uni-form, flat bar construction and outstand-ing junction strength, provides the primary reinforcement in [...]
NAUE m³ wall systems - Panel When embankments are planned with in-clinations exceeding 70°, a vegetated face is usually not possible or requires significant and potentially cost-prohibitive work. These situations require stiffer facing sys-tems and high-strength reinforcement, but aesthetic, economical facings are still pos-sible. The NAUE PANEL Secugrid® geogrid system [...]
Secugrid® HS geogrids are laid geogrids made of high tenacity polyester filaments with an extruded polyethylene protective coating and welded junctions. Secugrid® HS combines high tensile strengths and low creep tendency with extreme robustness and resistance. Secugrid® HS was developed specifically for geotechnical applications in earthworks where tensile strengths of [...]
Secugrid® PET/PP Geogrids Secugrid® PET/PP uniaxial and biaxial geogrids are laid geogrids made of stretched, monolithic polyester (PET) or polypropylene (PP) flat or profile bars with welded junctions. Secugrid® PET/PP geogrids combine high stiffness and low creep tendency with extreme robustness.
Secugrid® geogrid introduction Geogrids are polymeric products formed by joining inter-secting ribs. They have large open areas also known as „apertures“. The directions of the ribs are referred to as machine direction (md), orientated in the direction of the manufacturing process or cross machine direction (cmd) perpendicular to the machine [...]
Naue Secugrid® geogrids are produced with a new dimension of manufacturing technology. The reinforcement element is a highly-oriented polypropylene or polyester bar that is uniformly extruded and pre-stressed to achieve a high modulus and high strength at low elongations. This is combined with the Naue patented welding technology to provide [...]
Combigrid® is a composite of a laid geogrid made of stretched, monolithic flat bars with welded junctions and a mechanically bonded and calendered filter geotextile welded within the geogrid structure. Combigrid® is used for stabilisation and reinforcement of soils in many fields of infrastructure, environmental protection, and hydraulic engineering applications.
Advantages of needle-punched BENTOFIX® Geosynthetic Clay Liners (GCLs) for structural waterproofing. Bentofi x® Thermal Lock geosynthetic clay liners (GCLs) - also known as geosynthetic clay barriers (GBR-C) - are needle-punched, reinforced composites that combine two outer layers of durable geotextile and an uniform core of high-swelling powder sodium bentonite clay. [...]
Bentofix® Geosynthetic Clay Liners (GCLs) Bentofix® Thermal Lock geosynthetic clay liners (GCLs) - also known as geosynthetic clay barriers (GBR-C) - are needle-punched, reinforced composites that combine two durable geotextile outer layers and a uniform core of high-swelling powder sodium bentonite clay. This forms a uniform, multi-directional, shear-resistant hydraulic barrier [...]
Bentofix® X Multicomponent Geosynthetic Clay Liner (GCL) - also known as geosynthetic clay barrier (GBR-C) - is a needle-punched, fibre-reinforced composite that combines two durable geotextile outer layers and a uniform core of high-swelling sodium bentonite powder with an additional polyethylene extrusion-coated barrier. This forms a multi-directional, shear-resistant, hydraulic, multicomponent [...]
